Pixel Repair Service
BMW - Land Rover -

• Torx #10 Screw Driver
• Phillips #2 Screw Driver
• Flat Head Screw Driver

Select your vehicle for detailed removal instructions with pictures:

General Removal Process:

1. Find a place to Park Your Car for a few days.
2. Move the steering wheel down and out and out of the way.
3. Pry off the wood grain plates on either side of the steering wheel to expose the lower bezel screws.
4. Remove the Phillips screws from the bottom of the bezel and the Torx screws from the top.
5. Detach the right side wires and move bezel out of the way.
6. Remove the Torx screws from the top of the cluster.
7. Pull the instrument cluster forward to get access to the wiring on the back.
8. Unplug the three wiring harnesses from the cluster and remove it from the dash.