BMW X5 Series e53

Instrument Cluster Installation Process

Tools needed:

• Torx #10 Screw Driver
• Phillips #2"
• Flat Head Screw Driver

Locate the Black wiring harness connector on the left side

Unlatch the connector by pressing on the tab

and lowering the lever to disconnect plug

Lower steering wheel down and out

Reconnect the blue and white connectors on the left side

Latch the connector by sliding the lever till it locks

Pull the connector to verify that it is secure

Image of secured connector

Slide cluster in place

Replace 2 (two) upper Torx #10 screws

Thank you for your business and enjoy!