BMW X5 Series e53

Instrument Cluster Removal Process

Tools needed:

• Torx #10 Screw Driver
• Phillips #2"
• Flat Head Screw Driver

Remove 2 (two) upper Torx #10 screws

Lower steering wheel down and out

Pull cluster forward

Locate the Black wiring harness connector on the left side

On each connector there is a lever with a lock on it.

Push down on the lock to release the lever while pulling back on the lever. Rotate the lever 90 degrees then pull the connector out.

Remove the blue and white connectors on the right side and slide cluster out.

Click here for shipping instructions.

Click here for installation instructions.