Instrument Cluster Installation Process
- Torx #10 Screw Driver
- Phillips #2"
- Flat Head Screw Driver
To install the intrument cluster lower the steering wheel and slide the cluster in place.
blue, gray and green connectors by setting the purple lever to the 90 degree position
(oppisite of lock) then push the connected down in the socket until it stops.
Then slide the purple lever to the locked position.
Push the cluster back in place and replace the two Torx screws holding it in
Replace the plastic accordian cover by placing the lower two
guide tabs in there socket and snapping the piece back in place.
Replace the steering column bezel making sure to have all corners
aligned before replacing the the two Phillips screws.
Thank you for your business and enjoy your new cluster!